How to Replace Head Gaskets 1997-2003 Ford F-150 ( 2 Valve)

Buy Now! New Head Gasket Set from This video shows you how to install head gaskets on your 1997-2003 Ford F-150 ( - 2 valve). This process should be similar on the following vehicles: 1997 Ford F-150 1998 Ford F-150 1999 Ford F-150 2000 Ford F-150 2001 Ford F-150 2002 Ford F-150 2003 Ford F-150 Tools you will need: • Complete Metric Wrench Set • Complete Metric Socket Set • Fan Clutch Wrench • Fuel Line Disconnect Tool • Harmonic Balancer Installer • Harmonic Balancer Puller • Oil Cooler Line Disconnect Tool • Pulley Removal Tool • Torque Angle Gauge • Trim Tool Set • Vacuum • Bent Nose Pliers • Needle nose pliers • Needle nose pliers • Pliers • Side Cutters • 1/2 Inch Impact Gun • 3/8 Inch Impact Gun • 1/2 Inch Breaker Bar • 1/2 Inch Ratchet • 1/4 Inch Ratchet • 3/8 Inch Breaker Bar • 3/8 Inch Drive Ratchet • Socket Extensions • Swivel • Torque Wrench • Anti-Freeze • Brake Parts Cleaner • Engine Oil • Gloves • • Paper Towels • RTV • Rust Penetrant • Safety Glasses • Sandpaper • Silicone Paste • Drain Pan • Pick • Razor Blade / Gasket Scraper • Rubber Mallet • Sanding Block • Wire Brush Subscribe: Check out our playlist: Ford F-150 10th Generation 1997-2003: ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.